Set up connection to 1C

Last update: September 06 2024

Set up connection to 1C

You can connect to 1C in a ready-made cloud via web client, thin client and thick client (configurator). Connection via thin and thick client requires preconfiguration of the connection.

Set up a thin client connection⁠

You can connect to 1C through a thin client:

• on a private network on Selectel's infrastructure;
• over the internet from any device.

On a private network

1. Prepare the cloud server.
2. Install the thin client.
3. Create a private connection in the cluster settings.
4. Add the information base to the thin client.

Prepare the cloud server⁠

1. Make sure that set up a cloud server in the same bulletwhere the required information base is located. The pool of the information base can be viewed in control panels under Ready cloud 1C → Information bases → information base card. The list of cloud servers can be viewed in control panels under Cloud platform → Servers.

2. Make sure that added the cloud server to a private subnet. Server subnets can be viewed in control panels under Cloud platform → Servers → server page → tab Ports.

Install the thin client⁠

1. Connect to the cloud server.

2. Install the thin client on the cloud server. The version of the thin client must match the version of 1C in the ready cloud. You can view the cloud-ready version of 1C in the control panels under Ready cloud 1C → 1C server clusters → cluster page → tab Settings. The client of the required version can be downloaded from the service 1C:Program Update.

Create a private connection in the cluster settings⁠

1. В control panels go to Ready cloud 1C → 1C server clusters.

2. Open the cluster page → tab Connection.

3. If you have an internet connection, remove it by clicking in the connection block. .

4. Select the type of connection — Private.

5. Select the private network to which you have added cloud serveryou can look at control panels under Cloud platform → Servers → server page → tab Ports.

6. Click Create a connection. The selected private network will automatically become available for the service project in the ready 1C cloud. The service project will be displayed in control panels under Cloud platform → Networks → network card → tab Projects.

Add the information base to the thin client⁠

1. Connect to the cloud serveron which installed a thin client.

2. Start the thin client.

3. Click Add.

4. Select Adding an existing information base to the list.

5. Select a base location option On the 1C:Enterprise server.

6. In the field Server cluster paste the connection address, you can copy it to control panels under Ready cloud 1C → Information bases → information base page → tab Connection → block Fat client.

7. In the field Information base name insert the name of the information base, can be copied to control panels under Ready cloud 1C → Information bases → information base page → tab Connection.

8. Click Next.

9. Optional: change the startup parameters.

10. Click Done.

Over the Internet

1. Install the thin client.
2. Add the information base to the thin client.

Install the thin client⁠

Install the thin client. The version of the thin client must match the version of 1C in the ready cloud. You can view the 1C version in the ready cloud in the control panels under Ready cloud 1C → 1C server clusters → cluster page → tab Settings. The client of the required version can be downloaded from the service 1C:Program Update.

Add the information base to the thin client⁠

1. Open the thin client.

2. To add an information base to the list, click Add.

3. Select Adding an existing information base to the list.

4. Select a base location option On the 1C:Enterprise server.

5. In the field Server cluster paste the connection address, you can copy it to control panels under Ready cloud 1C → Information bases → information base page → tab Connection → block Thin Client / WEB.

6. In the field Information base name insert the name of the information base, can be copied to control panels under Ready cloud 1C → Information bases → information base page → tab Connection.

7. Click Next.

8. Optional: change the startup parameters.

9. Click Done.

Configure connection via thick client (configurator)⁠

You can connect to 1C through a thick client:

• over a private network from the Selectel infrastructure;
• over the internet from any device.

On a private network

1. Prepare the cloud server.
2. Install a thick client.
3. Create a private connection in the cluster settings.
4. Add the information base to the thick client.

Prepare the cloud server⁠

1. Make sure that set up a cloud server in the same bulletwhere the required information base is located. The pool of the information base can be viewed in control panels under Ready cloud 1C → Information bases → information base card. The list of cloud servers can be viewed in control panels under Cloud platform → Servers.

2. Make sure that added the cloud server to a private subnet. Server subnets can be viewed in control panels under Cloud platform → Servers → server page → tab Ports.

Install the thick client (configurator)⁠

1. Connect to the cloud server.

2. Install the thick client, use the instructions Installation of 1C:Enterprise platform 1C documentation. The platform version must match the 1C version in the ready cloud. The version of 1C in the ready cloud can be viewed at control panels under Ready cloud 1C → 1C server clusters → cluster page → tab Settings. The platform of the required version can be downloaded from the service 1C:Program Update.

Create a private connection in the cluster settings⁠

1. В control panels go to Ready cloud 1C → 1C server clusters.

2. Open the cluster page → tab Connection.

3. If you have an internet connection, remove it by clicking in the connection block. .

4. Select the type of connection — Private.

5. Select the private network to which you have added cloud serveryou can look at control panels under Cloud platform → Servers → server page → tab Ports.

6. Click Create a connection. The selected private network will automatically become available for the service project in the ready 1C cloud. The service project will be displayed in control panels under Cloud platform → Networks → network card → tab Projects.

Add the information base to the thick client⁠

1. Connect to the cloud serveron which a fat client has been installed.

2. Start the thin client.

3. Click Add.

4. Select Adding an existing information base to the list.

5. Select a base location option On the 1C:Enterprise server.

6. In the field Server cluster paste the connection address, you can copy it to control panels under Ready cloud 1C → Information bases → information base page → tab Connection → block Fat client.

7. In the field Information base name insert the name of the information base, can be copied to control panels under Ready cloud 1C → Information bases → information base page → tab Connection.

8. Click Next.

9. Optional: change the startup parameters.

10. Click Done.

Over the Internet

carefully

We recommend using a thick client connection over the Internet for temporary access only. Connection is performed via TCP protocol, any user will be able to connect to the cluster.

1. Create a public connection in the cluster settings.

2. Install a thick client.

3. Add the information base to the thick client.

4. Optional: when the work is complete, remove the public connection in the cluster settings.

Create a public connection in the cluster settings⁠

1. В control panels go to Ready cloud 1C → 1C server clusters.

2. Open the cluster page → tab Connection.

3. If you have a private connection, delete it by clicking in the connection block. .

4. Select the type of connection — Public.

5. Check the box I understand that the cluster will be accessible from any computer on the Internet.

6. Click Create a connection.

Install the thick client (configurator)⁠

Install the thick client, use the instructions Installation of 1C:Enterprise platform 1C documentation. The platform version must match the 1C version in the ready cloud. The version of 1C in the ready cloud can be viewed at control panels under Ready cloud 1C → 1C server clusters → cluster page → tab Settings. The platform of the required version can be downloaded from the service 1C:Program Update.

Add the information base to the thick client⁠

1. Start the thick client.

2. Click Add.

3. Select Adding an existing information base to the list.

4. Select a base location option On the 1C:Enterprise server.

5. In the field Server cluster paste the connection address, you can copy it to control panels under Ready cloud 1C → Information bases → information base page → tab Connection → block Fat client.

6. In the field Information base name insert the name of the information base, can be copied to control panels under Ready cloud 1C → Information bases → information base page → tab Connection.

7. Click Next.

8. Optional: change the startup parameters.

9. Click Done.

optional: remove the public connection in the cluster settings⁠

As long as a public connection exists in the cluster settings, the cluster is accessible from the Internet. We recommend removing the connection when the work is completed.

1. В control panels go to Ready cloud 1C → 1C server clusters.

2. Open the cluster page → tab Connection.

3. Delete the connection by clicking in the connection block. .