openstack_networking_subnet_route_v2
Эта инструкция — копия официальной документации OpenStack Terraform-провайдера в Terraform Registry.
Creates a routing entry on a OpenStack V2 subnet.
Example Usage
resource "openstack_networking_router_v2" "router_1" {
name = "router_1"
admin_state_up = "true"
}
resource "openstack_networking_network_v2" "network_1" {
name = "network_1"
admin_state_up = "true"
}
resource "openstack_networking_subnet_v2" "subnet_1" {
network_id = openstack_networking_network_v2.network_1.id
cidr = "192.168.199.0/24"
ip_version = 4
}
resource "openstack_networking_subnet_route_v2" "subnet_route_1" {
subnet_id = openstack_networking_subnet_v2.subnet_1.id
destination_cidr = "10.0.1.0/24"
next_hop = "192.168.199.254"
}
Argument Reference
The following arguments are supported:
-
region
- (Optional) The region in which to obtain the V2 networking client. A networking client is needed to configure a routing entry on a subnet. If omitted, theregion
argument of the provider is used. Changing this creates a new routing entry. -
subnet_id
- (Required) ID of the subnet this routing entry belongs to. Changing this creates a new routing entry. -
destination_cidr
- (Required) CIDR block to match on the packet’s destination IP. Changing this creates a new routing entry. -
next_hop
- (Required) IP address of the next hop gateway. Changing this creates a new routing entry.
Attributes Reference
The following attributes are exported:
region
- See Argument Reference above.subnet_id
- See Argument Reference above.destination_cidr
- See Argument Reference above.next_hop
- See Argument Reference above.
Notes
Import
Routing entries can be imported using a combined ID using the following format: <subnet_id>-route-<destination_cidr>-<next_hop>
$ terraform import openstack_networking_subnet_route_v2.subnet_route_1 686fe248-386c-4f70-9f6c-281607dad079-route-10.0.1.0/24-192.168.199.25