Перейти к основному содержимому
openstack_networking_router_route_v2
Последнее изменение:

openstack_networking_router_route_v2

к сведению

Эта инструкция — адаптированная копия официальной документации OpenStack Terraform-провайдера в Terraform Registry.

Creates a routing entry on a OpenStack V2 router.

Example Usage⁠

resource "openstack_networking_router_v2" "router_1" {
  name           = "router_1"
  admin_state_up = "true"
}

resource "openstack_networking_network_v2" "network_1" {
  name           = "network_1"
  admin_state_up = "true"
}

resource "openstack_networking_subnet_v2" "subnet_1" {
  network_id = openstack_networking_network_v2.network_1.id
  cidr       = "192.168.199.0/24"
  ip_version = 4
}

resource "openstack_networking_router_interface_v2" "int_1" {
  router_id = openstack_networking_router_v2.router_1.id
  subnet_id = openstack_networking_subnet_v2.subnet_1.id
}

resource "openstack_networking_router_route_v2" "router_route_1" {
  depends_on       = [openstack_networking_router_interface_v2.int_1]
  router_id        = openstack_networking_router_v2.router_1.id
  destination_cidr = "10.0.1.0/24"
  next_hop         = "192.168.199.254"
}

Argument Reference⁠

The following arguments are supported:

  • region — (Optional) The region in which to obtain the V2 networking client. A networking client is needed to configure a routing entry on a router. If omitted, the region argument of the provider is used. Changing this creates a new routing entry.

  • router_id — (Required) ID of the router this routing entry belongs to. Changing this creates a new routing entry.

  • destination_cidr — (Required) CIDR block to match on the packet’s destination IP. Changing this creates a new routing entry.

  • next_hop — (Required) IP address of the next hop gateway. Changing this creates a new routing entry.

Attributes Reference⁠

The following attributes are exported:

  • region — See Argument Reference above.
  • router_id — See Argument Reference above.
  • destination_cidr — See Argument Reference above.
  • next_hop — See Argument Reference above.

Notes⁠

The next_hop IP address must be directly reachable from the router at the openstack_networking_router_route_v2 resource creation time. You can ensure that by explicitly specifying a dependency on the openstack_networking_router_interface_v2 resource that connects the next hop to the router, as in the example above.

Import⁠

Routing entries can be imported using a combined ID using the following format: <router_id>-route-<destination_cidr>-<next_hop>

$ terraform import openstack_networking_router_route_v2.router_route_1 686fe248-386c-4f70-9f6c-281607dad079-route-10.0.1.0/24-192.168.199.25