Skip to main content
Change the IP address on the network interface
Last update:

Change the IP address on the network interface

For your information

If you change the network settings for the WAN interface, access to the firewall is lost. If you lose access to the firewall, create a ticket.

  1. Connect to the Selectel firewall through the GUI.
  2. From the Interfaces menu, go to Assignments.
  3. Open the Interface Assignments tab.
  4. Click the name of the network interface.
  5. Enable the interface by checking the Enable interface checkbox.
  6. In the Static IPv4 Configuration block, in the IPv4 Address field, change the IP address.
  7. Optional: Make changes to other network interface settings.
  8. Click Save → Apply Changes.