Skip to main content
Prescribe static routes
Last update:

Prescribe static routes

For your information

If you create a static route for the WAN interface, access to the firewall is lost. If you lose access to the firewall, create a ticket.

  1. Connect to the Selectel firewall through the graphical interface.
  2. On the menu. System go to Routing.
  3. Open the tab Gateways → block Gateways.
  4. Click + Add.
  5. Configure the settings for the gateway to be used for the static route.
  6. Click Save.
  7. Open the tab Static Routes.
  8. Click Add.
  9. Configure the static route parameters.
  10. Click SaveApply Changes.