Order servers in A-DC
To activate the service, send an application to site or file a ticket. Dedicated servers, firewalls and additional services are ordered by Selectel manager.
On the application form, please indicate:
- quantity and dedicated server configurations which will be hosted in the A data center;
- model hardware firewall (Fortinet, UserGate, Cisco, Continent, CheckPoint);
- list of additional means of information protection.
When connecting servers in the A data center, the following is used typical connection diagram.
An individual connection scheme can be agreed through the ticket system, used when placing its own network equipment, as well as when additional requirements for fault tolerance.
Service connection term — up to 10 working days for infrastructure, including server assembly for a typical connection scheme. For non-typical connection scheme — up to 20 working days.
Service provision
After the infrastructure is prepared, we will send a ticket about the infrastructure readiness. In the ticket we will provide all necessary access data: data for access to the server via IPMI; address, login and password of the firewall; connection scheme. In case of using certified information protection means, the "Act of installation of protection means" will be attached as an attachment.
When transferring infrastructure on a firewall:
- wan-interface aggregation with a public IP address is configured;
- created a network interface for local traffic on the server with a private IP address. This address is used as the default gateway for the server. You can configure a different IP address;
- a network interface for local IPMI server traffic with a private IP address was created;
- configured port forwarding for connection to the server via IPMI;
- access from the Internet to the local network and from the local network to the Internet is configured.
To work with the infrastructure you need basic setup. The network in the A-DC is physically isolated from the Selectel shared networks, because of this it is not possible to manage the network and the server's operating system through the control panel. The server will appear in the control panel with a status of "No Power Information". The server can be configured via IPMI and the network via firewall.