Connect Direct Connect — logical port
-
Make sure that you created and configured a private network through the global router.
-
Rent a communication channel from a partner operator — RETN or MSK-IX.
-
In the control panel, go to Network services → Direct Connect.
-
Open the tab Logic port.
-
Click Order services.
-
Select the operator — RETN or MSK-IX.
-
Optional: enter information about the connection point on the operator side — cabinet number, equipment ID, port number, connector type, transceiver type. You request this data yourself from the operator. If you have not yet started coordinating the connection with the operator, leave the field blank.
-
Optional: Enter the VLAN ID from the operator's side. You request this data from the operator yourself. If you have not yet started coordinating the connection with the operator, leave the field blank.
-
Select the bandwidth — 1 or 10 Gbps.
-
Specify additional information about the connection:
- if you have multiple global routers — the ID of the router you used to organize the network in step 1. The ID can be found in control panel under Network services → Selectel Global Router → router page;
- a private subnet of at least
/29The subnet must not overlap with other private networks on the selected router. The subnet must not overlap with other private networks on the selected router.
-
Click Order.
-
You will receive an automated ticket after your order. Wait for a Selectel employee to respond to this ticket. He will clarify the details and give detailed instructions on how to further organize the connection. Selectel will take up to three working days to set up the connection.