Skip to main content

Add static routes

warning

If you create a static route for the WAN interface, you will lose access to the firewall. If you have lost access to the firewall, create a ticket.

  1. Connect to the Selectel firewall via GUI.
  2. From the System menu, go to Routing.
  3. Go to the Gateways tab → Gateways section.
  4. Click + Add.
  5. Configure the parameters of the gateway that will be used for the static route.
  6. Click Save.
  7. Go to the Static Routes tab.
  8. Click Add.
  9. Configure the static route parameters.
  10. Click Save → Apply Changes.