|
- added the ability to install an OS from a custom image via automatic installation;
- now when ordering a custom server, you can order a server to your own site;
- now, after ordering a server, the monitoring tab remains inactive until the server becomes active;
- in the audit logs of the dedicated service, the OS reinstallation event now displays information about the OS.
|
| |
| |
|
-
added IPMI monitoring of dedicated servers;
-
in automatic OS installation, limited the number of disks in RAID-1 auto-selection — now RAID-1 is assigned to only two disks by default;
-
now display the option to upgrade custom servers in the list of ordered servers;
-
added new pre-configured dedicated server configurations:
-
added new processors for custom servers:
- AMD EPYC 9375F 32x3.8 GHz SMT;
- AMD EPYC 9555P 64x3.2 GHz SMT;
-
added new platforms for custom servers:
|
|
-
in the audit logs of the dedicated service, we now display enabling and disabling a port, and enabling and disabling a subnet from a unit;
-
added new pre-configured dedicated server configurations:
-
AR43-NVMe:
Processor: AMD Ryzen 9 9950X, 4.3 GHz, 16 cores; RAM: 128 GB DDR5 non-ECC; Disks: 2 × 2000 GB SSD NVMe M.2;
-
BL24-NVMe:
Processor: AMD Ryzen 9 9950X, 4.3 GHz, 16 cores; RAM: 128 GB DDR5 ECC; Disks: 2 × 1920 GB SSD NVMe;
-
BL27-NVMe-10GE:
Processor: AMD EPYC 9015, 3.6 GHz, 8 cores; RAM: 64 GB DDR5 ECC Reg; Disks: 2 × 960 GB SSD NVMe;
-
DL-39:
Processor: 2 × Intel Xeon E5-2630v4, 2.2 GHz, 20 cores; RAM: 64 GB DDR4 ECC Reg; Disks: 2 × 480 GB SSD SATA.
|
|
-
now when automatically installing Windows OS, you can select the system disk;
-
added granular roles for access control to the Servers and Hardware: dedicated.admin and dedicated.viewer.
Roles are available in two access scopes:
- at the account level;
- at the project level;
-
added new pre-configured dedicated server configurations:
|
| |
|
-
now, if you lack sufficient funds to pay for the server, you can top up your balance without leaving the server order page;
-
added an OS image with the Open WebUI application;
-
added new pre-configured dedicated server configurations:
-
GL8-B300-HGX-25GE:
Processor: 2 × Intel Xeon 6767P, 2.4 GHz, 128 cores; GPU: 8 × Nvidia B300 288 GB HBM3e SXM; RAM: 2048 GB DDR5 ECC Reg; Disks: 1000 GB SSD NVMe M.2, 2 × 7680 GB SSD NVMe;
-
AR45G-NVMe-H200:
Processor: AMD Ryzen 9 9950X, 4.3 GHz, 16 cores; GPU: Nvidia H200 NVL 141 GB HBM3e; RAM: 192 GB DDR5 non-ECC; Disks: 2 × 2000 GB SSD NVMe M.2;
-
AR45G-NVMe-RTX6000:
Processor: AMD Ryzen 9 9950X, 4.3 GHz, 16 cores; GPU: Nvidia RTX PRO 6000 96 GB GDDR7; RAM: 192 GB DDR5 non-ECC; Disks: 2 × 2000 GB SSD NVMe M.2.
|
|
-
the Network section now displays the service type for dedicated subnets and public VLANs;
-
audit logs now include events from the dedicated service;
-
added new pre-configured dedicated server configurations:
|
|
-
a VLAN for a private network is no longer allocated if only one dedicated server is ordered on the account;
-
when assigning a public dedicated IP address to a server, the subnet list now displays subnets that have at least one free IP address. You can view the list of all networks and addresses in the Control panel: in the top menu, click Products → Dedicated Servers → Network;
-
when assigning a public dedicated IP address to a server, the subnet list now only displays subnets available for this service. For example, a subnet for a colocated server will not be displayed in the list of available subnets for a dedicated server;
-
added new pre-configured dedicated server configurations:
-
Selectel PL91-NVMe-10GE:
Processor: 2 × Intel Xeon 6746E, 2 GHz, 112 cores; RAM: 384 GB DDR5 ECC Reg; Disks: 2 × 7840 GB SSD NVMe, 1 TB SSD NVMe M.2;
-
GL1-H200-25GE:
Processor: 2 × AMD EPYC 9274F, 4.05 GHz, 24 cores; GPU: Tesla H200 141 GB HBM3e; RAM: 256 GB DDR5 ECC Reg; Disks: 500 GB SSD NVMe M.2;
-
GL15-2-A4000:
Processor: 2 × AMD EPYC 9274F, 4.05 GHz, 24 cores; GPU: A4000 16 GB GDDR6; RAM: 128 GB DDR5 ECC Reg; Disks: 2 × 960 GB SSD NVMe, 500 GB SSD NVMe M.2;
-
AL81-NVMe-10GE:
Processor: 2 × AMD EPYC 7343, 3.2 GHz, 16 cores; RAM: 128 GB DDR4 ECC Reg; Disks: 2 × 960 GB SSD NVMe, 2 × 18 TB HDD SATA;
-
DL-36:
Processor: 2 × AMD EPYC 7452, 2.35 GHz, 32 cores; RAM: 128 GB DDR4 ECC Reg; Disks: 2 × 1920 GB SSD SATA.
|
| |