Skip to main content
Auto top-up
Last update:

Auto top-up

In order to always have enough money on your balance to pay for products and services, you can set up auto-replenishment of your balance from your bank card for a certain amount.

Notifications about upcoming, successful and unsuccessful debits (for example, there is not enough money on the card or there was a technical failure at the bank) will be sent to your e-mail.

You can set up autofill:

  • scheduled — replenishment will take place on a certain day of the month;
  • balance threshold — replenishment will take place when the amount on the balance drops to the specified value.

To set up autoreplenishment, a bank card must be saved. All autoreplenishments can use the same bank card. You can activate autoreplenishment for each balance:

Save the bank card

To avoid entering card data every time you make a payment or to activate autofill, you can save your card. If the card is saved, but no autofill is activated, no money will be deducted from the card.

To save the card when refilling the balance, check the Save card checkbox . Within 10 minutes the card will appear on the Auto Top Up page in the My Cards block.

Selectel does not store bank card data. The data is processed by the payment system of Your Payments international processing center, which uses PCI DSS Level 1 security certificate to protect the data.

Delete bank card

  1. In the control panel, on the top menu, click Billing.
  2. Go to the Auto Refill section.
  3. In the card of the desired card, click .

Activate auto top-up

Before activating auto top-up, you need to save your bank card.

  1. In the control panel, on the top menu, click Billing.
  2. Go to the Auto Refill section.
  3. Click Add Auto Refill.
  4. Select the condition for auto refill.
  5. Select a bank card.
  6. If you have selected scheduled autofill, specify the day of the month when autofill will occur.
  7. If you have chosen auto refill by balance threshold, specify the amount at which the auto refill will be performed.
  8. Enter the amount of the recharge.
  9. Click Add. A notification will be sent to your mailbox that auto refill has been activated.

Change auto top-up

  1. In the control panel, on the top menu, click Billing.
  2. Go to the Auto Refill section.
  3. Change the settings and click Save.

Disable auto top-up

Disabled autofill can be enabled.

  1. In the control panel, on the top menu, click Billing.
  2. Go to the Auto Refill section.
  3. Turn off autofill.

Remove auto top-up

  1. In the control panel, on the top menu, click Billing.
  2. Go to the Auto Refill section.
  3. In the autofill menu, click Delete autofillDelete.